Sound Familiar?
Typical off the shelf coating lines are slow to process. Cost effective density is achieved by stacking parts in multi- tiers high enough that part loaders must stand on ladders to fill one rack. At 7 fpm, parts slowly pass through the powder booth. 20 guns robotically oscillate, throwing a giant powder cloud. Powder builds. Parts on the bottom of each rack pick up way too much powder as gravity takes it's natural course. Consistent film build is very difficult if not impossible to achieve.
Tight Tolerance Coating
Fusion has engineered and built our line with the belief that film builds can be controlled to tight tolerance consistently through the entire run. Parts processed on our line are hung in 1-2 multi-tiers at speeds up to 22 fpm. Single or double tier racked parts are processed through a 30" max window. As parts quickly pass through the powder field, there is no chance for gravity to do it's work. Each part passes though a single gun tips energy field, never another guns over spray. Typical SPC limits are set to +/- .02mm.
Cost Effective Masking
This 2 tier system also allows for cost effective complex on-line masking. A simple yet effective philosophy: one or two lanes of parts passing quickly in single file are much easier to mask and unmask.
6 Stage Pretreat.
Envoirnmentally Controlled Powder room.
Optional zinc prime for maximum corrosion protection.
SPC included with every order.
email: sales@fusioncoatingsinc.com.
Phone: 610-693-5886 Fax: 610-693-6802.
Mailing Address: PO Box 224, Robesonia, PA 19551.
Physical Address: 932 West Penn Ave, Robesonia, PA 19551.